PIT LIMIT DESIGN FOR MINING IN SUB BLOCK 4 TAA BLOCK PT BUMI NIKEL NUSANTARA PUUWONUA VILLAGE ANDOWIA DISTRICT, NORTH KONAWE REGENCY

Authors

  • La Ode Abdul Rajab
  • Erwin Anshari Halu Oleo University
  • Irfan Saputra Halu Oleo University
  • Asri Arifin Halu Oleo University

Keywords:

Mine Design, Pit Limit, Safety Factor, Reserves

Abstract

Limited Company (PT) Bumi Nickel Nusantara is a national private company engaged in the nickel commodity mining industry with a mining business permit (IUP) area of ​​± 386 Ha. Currently the company plans to open new mining land where exploration activities have been carried out to estimate reserves in Sub Block 4 of the TAA Block. Therefore, a mining pit limit design is needed to serve as a guide or guide in order to know the mining limits for the pit that will be mined. This research aims to determine the mining pit limit design and determine the amount of mineable reserves based on mining pit limit parameters. The research method is quantitative research which combines theory with data obtained in the field. The mining pit limit design for Sub Block 4 of PT Bumi Nikel Nusantara's TAA Block was made based on geometric recommendations from slope stability analysis with a tier height of 6 meters, a width of 2 meters, a single slope of 60° and a ramp width of 9 meters. The results of the geotechnical analysis of the level geometry meet the standard safety factors in accordance with the FK value of the mine slope based on Minister of Energy and Mineral Resources Decree Number 1827 K/30/MEM-RI/2018 for single slope, inter-ramp and overall slope conditions. The mining pit limit design in Sub Block 4 of PT Bumi Nikel Nusantara's TAA Block has an opening area of ​​± 4.27 ha where the highest elevation is 412 meters above sea level and the lowest elevation is 369 meters above sea level. Minable reserves are based on the mining pit limit design in Sub Block 4 which meets the company's cut off grade standards, and includes mining recovery parameters of 90%, resulting in a volume of 202.972,50 m³ and a tonnage of 324.756,00 tons with an average grade of 1.72% Ni.

References

Adnannst, Maryanto, dan Dono. (2015). Rencana Rancangan Tahapan Penambangan untuk Menentukan Jadwal Produksi PT. Cipta Kridatama Kecamatan Meureubo, Kabupaten Aceh Barat, Provinsi Aceh. Prosiding Teknik Pertambangan, d, Hal.87–91. ISSN: 2460-6499.

Arif. (2021). Geoteknik Tambang. Jakarta: Gramedia Pustaka Utama. ISBN: 978- 602-03-2735-8.

Bargawa, W. S. (2018). Perencanaan Tambang Edisi Kedelapan. Kilau Book, Yogyakarta. ISBN-10: 978-6-2375-9431-4.

ESDM, D. M. (2014). Pedoman Teknis Pemantauan Kestabilan Lereng Tambang dan Timbunan Batuan Timbunan.

Hakam. (2016). Stabilitas Lereng dan Dinding Penahan Tanah. padang: Universitas Andalas Press.

Hardiyatmo, H. S. (2018). Mekanika Tanah II. Gajah Mada University Press. ISBN: 979-420-637-7.

Hustrulid, W., Kuchta, M., dan Martin, R. (2013). Open Pit Mine Planning & Design 3rd Edition. CRC Press Taylor & Francis Group. London. ISBN: 978-1-4822-2117-6.

KEPMEN ESDM Nomor 1827 K/30/MEM/2018 Tentang “Pedoman Pelaksanaan Kaidah Teknik Pertambangan Yang Baik”.

Kennedy, B.A. (2009). Surface Mining 2nd Edition. USA: Society for Mining, Metallurgy, and Exploration, Inc. ISBN: 978-0-87335-303-8.

Komite Cadangan Mineral Indonesia. (2017). Kode Pelaporan Hasil Eksplorasi, Sumberdaya Mineral dan Cadangan Mineral Indonesia, Perhimpunan Ahli Pertambangan Indonesia dan Ikatan Ahli Geologi Indonesia.

Malli, Pamukcu, dan Köse. (2015). Determination of Optimum Production Capacity and Mine Life Considering Net Present Value in Open Pit Mining at Different Overall Slope Angles. Acta Montanistica Slovaca Volume.20, Hal.62–70.

Pranata, H., dan Yulhendra, D. (2021). Rancangan Pelaksanaan Eksploitasi Nikel pada Blok X PT. Paramitha Persada Tama Desa Boenaga Kecamatan Lasolo Kepulauan Kabupaten Konawe Utara Provinsi Sulawesi Tenggara, Jurnal Bina Tambang, Vol. 6(5), Hal. 218–231. ISSN: 2302-3333.

Rizky, dan Yulhendra. (2020). Estimasi Sumber Daya Bijih Besi Menggunakan Metode Inverse Distance Weighted dan Ordinary Kriging di PT . KUATASSI ,. Vol.7, No.1, Hal.96–106. ISSN: 2302-3333.

Sidiq. (2019). Perencanaan Desain Tambang. Yogyakarta: Elje Branding. ISBN: 978-602-336-544-9.

Published

2024-11-19

Most read articles by the same author(s)

1 2 3 > >>