COST ESTIMATION OF OVERBURDEN STRIPPING IN LATERITE NICKEL ORE MINING AT PIT A PT CERIA NUGRAHA INDOTAMA WOLO DISTRICT KOLAKA REGENCY
Keywords:
Overburden Stripping, Loader, Haulage Equipment, CostsAbstract
Overburden removal activities inevitably incur production costs, including expenses related to the equipment employed. Therefore, it is essential to perform a cost calculation to provide an estimate of the expenditures that the company will incur. At PT Ceria Nugraha Indotama, which currently plans to open a new pit, namely Pit A encompassing approximately ±8.4 hectares with a total overburden volume of 1,046,411.38 m³ or 1,747,507.00 tons. This study aims to determine the required number of excavation and hauling equipment, as well as to estimate the total expenditure associated with overburden removal activities. The research employs a quantitative methodology that integrates theoretical principles with field-acquired data. The findings indicate that overburden removal operations necessitate one unit of Sany SY330H excavator for digging, two additional units for loading activities, and six units of Fuso Fighter FN62FL dump trucks for hauling. The projected costs for overburden removal consist of equipment rental expenses amounting to Rp 14.030.275.419 and equipment operational expenses totaling Rp 21.466.624.394. Consequently, the overall cost required for overburden removal in the Pit A is Rp "35.496.900.000 " (thirty five billion four hundred ninety six million nine hundred thousand rupiah).
References
Arif, I., 2022, Nikel Indonesia Menuju Transisi Energi, Gramedia Pustaka Utama, Jakarta, ISBN: 978-602-06-6941-0.
Bargawa, W., S. 2018. Perencanaan Tambang Edisi Kedelapan. Kilau Book. ISBN: 978-623-7594-31-4
Caterpillar., 2000, Performance Handbook. Caterpillar Inc, 1281.
Dzakir, L. O., Shaddad, A. R., Syahrul, Kurnia, H., Aldiyansyah, Prianata, Y. L. O., Amir, M. K., Bakri, S., Kadar, M. I., dan Dullah, N. M., 2024, Rekayasa Perencanaan Tambang.
Ercelebi, S. G., dan Bascetin, A., 2009, Optimization of shovel-truck system for surface mining. Journal of the Southern African Institute of Mining and Metallurgy, 109(7), 433–439.
Febrianti, D., Zakia, Z., dan Mawardi, E., 2021, Analisis Biaya Operasional Alat Berat pada Pekerjaan Timbunan. Tameh: Journal of Civil Engineering, 10(1), 33–41.
Franicha, F., Hidayat, S., dan Iskandar, T., 2017, Mining Equipment Analysis to Reach Target Production on Overburden in Kutai Kertanegara East Borneo. Ournal of Engineering, 7(2), 36–44.
Indonesianto, Y., 2016, Pemindahan Tanah Mekanis, Yogyakarta, Sekolah Tinggi Teknologi Nasional. ISBN:978-602-820607-5.
Komatsu., 2019, Spesification and Aplication handbook edition 32.
Kusrin., 2008, Pemindahan Tanah Mekanis & Alat Berat. Semarang University Press.
Rostiyanti, S. F., 2008, Alat Berat Untuk Proyek Konstruksi. Jakarta, Rineka Cipta. ISBN: 978-979-518-850-6.
Rumengan, M. R., Dundu, A. K. T., dan Pratasis, P. A. K., 2017, Analisis Kelayakan Investasi Alat Berat Stone Crusher Di Kelurahan Kumersot Kota Bitung. Jurnal Sipil Statik, 5(10), 687–688.
Siaahan, R., 2017, Proses Penambangan Batubara. Gadjah Mada University Press. ISBN: 979-420-359-9.
Tenriajeng, A. T., 2003, Pemindahan Tanah Mekanik
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Indi Surya Ningsih, Firdaus Firdaus, Wd. Rizky Awaliah Nafiu, Marwan Zam Mili

This work is licensed under a Creative Commons Attribution 4.0 International License.
