ESTIMATION OF OVERBURDEN REMOVAL COST AT PIT A4 SOUTH PT. STARGATE PASIFIC RESOURCES LANGGIKIMA DISTRICT NORTH KONAWE REGENCY SOUTHEAST SULAWESI PROVINCE

Authors

  • Sukma Ayu Pratiwi
  • Wahab Wahab Halu Oleo University
  • Marwan Zam Mili Halu Oleo University
  • Muhardi Mustafa Halu Oleo University

Keywords:

Overburden, digging equipment, Productivity equipment, Cost Estimation, nickel

Abstract

PT Stargate Pasific Resources is one of the companies engaged in the nickel mining industry and has been operating since 2007 which is administratively located in Molore Village, Langgikima District, North Konawe Regency, Southeast Sulawesi Province, with an area of Mining Business License (IUP) ± 1,213.20 Hectares, Mining activities at PT Stargate Pasific Resources itself use the open pit mining method. The company plans to open a new pit, namely in Pit A4 South with an area of ± 1.04 Ha with a tonnage of 108,000.00 tons. This study aims to determine the number of excavation and transportation equipment and to determine the total cost of stripping overburden. The research method is quantitative research that combines theory with data obtained in the field. Based on the results of the study, the number of excavation and transportation equipment needed in overburden stripping activities from the first month to the third month using Komatsu HB 365 Excavator as much as 1 unit, Komatsu PC 200 Excavator as much as 1 Unit and using Quester CWE 370 Dump Truck for hauling overburden material as much as 2 units. The total costs that will be incurred for overburden stripping activities include tool rental costs of Rp. 589,234,423.61 and tool operating costs of Rp. 704,419,906.23 Thus, the total overall cost of overburden stripping activities in Pit A4 South is around Rp. 1,293,654,329.84 (One Billion Two Hundred Ninety Three Million Six Hundred Fifty Nine Thousand Three Hundred Twenty Nine Rupiah).

References

Asmiani, N., Puspitasari, A., dan Widodo, S. 2017. Biaya Penambangan Nikel Pada PT.Bintang Delapan Mineral Kabupaten Morowali Provinsi Sulawesi Tengah. Jurnal Geomine. Vol . 5, No. 2, Hal. 76-79, ISSN : 2443-2083.

Caterpillar. (2000). Caterpillar Performance Handbook Edition 31 (Issue October)..

Choundary, R.P. 2015. Optimization Of Load–Haul– Dump Mining System By Oee And Match Factor For Surface Mining. International Journal of Applied Engineering and Technology, 5(2), Hal. 96-102. ISSN: 2277-212X.

Elias, M. (2002). Nickel laterite deposits – geological overview , resources and exploitation. Centre For Ore Deposite Research, University Of Tasmania, Hobart,Special Publication.

Epi, Handayani, R. H., dan HAK, A. (2017). Re Desain Pengaturan Peralatan Coal Getting Untuk Memenuhi Target Produksi Desember 2016. Jurnal Pertambangan, Vol.1, No.4. Hal.28–37. ISSN:2549-100M

Franicha, Hidayat, dan Iskandar. (2017). Mining Equipment Analysis To Reach Target Production On Overburden In Kutai Kertanegara East Borneo. Engineering Research And Application, Vol. 7, No. (2–4), Hal. 36–44. ISSN: 2248-9622.

Febe Franicha, S. H. and T. I. (2017). Mining Equipment Analysis to Reach Target Production on Overburden in Kutai Kertanegara East Borneo. Engineering Research and Application, Vol.7, No.2–4. Hal. 36–44. ISSN: 2248-9622.

Herlita, P., dan Murad. 2018. Analisis Kebutuhan Alat Muat dan Alat Angkut Pada Kegiatan Penambangan Soil di Area 242 Dengan Penerapan Metode Antrian Untuk Memenuhi Target Produksi Clay 3000 Ton/hari. Jurnal Bina Tambang, Vol. 3 No.3. ISSN: 2302:3333..

Hustrulid. M, Kuchta, R., & Martin. (2013). Open pit Mine Planning & Design (lo). CRC Press/Balkem. ISBN: 9781466575127. [10] Kholil, A. (2012b). Alat Berat. PT Remaja Rosdakarya Offset.

Indonesianto, Y. 2013. Pemindahan Tanah Mekanis. Yogyakarta: CV. Awan Poetih.

Kholil, A. (2012). Alat berat: Alat berat. ISBN: 978-979692-080-8., 1–275.

Komatsu. (2009). Specifications and applications handbook. December, 928

Komatsu. (2019). Application Handbook Edition 32 . Section 15A. Printed in Japan

Kurniadi, A., Rosana, M.F., Yuningsih, E.T., dan Pambui, H.L., (2018). Karakteristik Batuan Asal Pembentukan Endapan Nikel Laterit Di Daerah Madang dan Serakaman Tengah. Padjajaran Geoscience Journal. Volume 2(3), 221–234. ISSN 2597-4033

Lintjewas, L., Setiawan, I., dan Kausar, A. Al. (2019). Profil Endapan Nikel Laterit di Daerah Palangga, Provinsi Sulawesi Tenggara. RISET Geologi Dan Pertambangan, Vol.29, No.1. Hal. 91. ISSN: 2354-6638.

Mongelli, G., Taghipour, B., Sinisi, R.dan Khadivar, S. (2019). Mineralization and element redistribution in the Chah-Gheib Ni-laterite ore. Ore Geology Reviews. ISSN : 0169-1368

Mohutsiwa, M., dan Musingwini, C. (2015). Parametric estimation of capital costs for establishing a coal mine: South Africa case study. Journal of the Southern African Institute of Mining and Metallurgy, Vol.115, No.8. Hal. 789–797..

Nasuhi. M., Tono. T., Guskarnali., 2017. Optimalisasi Dan Produktifitas Alat Gali Muat Dan Angkut Pada Tambang Batu Granit PT. Vitrama Property DiDesa Air Mesu.Kecamatan Pangkala Baru. Kabupaten Bangka Tengah.Jurusan Teknik Pertambangan Universitas Bangka Belitung. Jurnal Mineral Maret 2017. Vol II. No 1.

Rostiyanti. (2008). Alat Berat Untuk Proyek Konstruksi. ISBN 978-979-518-850-6

Rumengan, M. R., Dundu, A. K. T., dan Pratasis, P. A. K. (2017). Analisis Kelayakan Investasi Alat Berat Stone Crusher Di Kelurahan Kumersot Kota Bitung. Jurnal Sipil Statik, Vol.5, No.10. Hal. 687–688. ISSN: 2337-6732

Saputra, F. 2018. Kajian Produktivitas Alat Muat dan Alat Angkut pada Pengupasan Overburden di Pit S5 Selatan. Indonesian Artikel Journal. Volume 1, No. 1. 29 – 39.

Sepriadi, dan Webisono, K. (2017). Evaluasi Geometri Jalan Angkut Terhadap Produktifitas Overburden Di Pit Mt 4 Penambangan Air Laya PT Bukit Asam (Persero), Tbk. Tanjung Enim Provinsi Sumatera Selatan. Jurnal Teknik Patra Akademik, Vol.8, No.2, Hal.1–9. ISSN: 2621-9328.

Subowo G. (2011). Penambangan Sistem Terbuka Ramah Lingkungan Dan Upaya Reklamasi Pasca Tambang Untuk Memperbaiki Kualitas Sumberdaya Lahan Dan Hayati Tanah. Jurnal Sumberdaya Lahan, Vol.5, No.2. Hal. 83–94. ISSN: 1907-0799.

Surono. (2013). Geologi Lengan Tenggara Sulawesi. In Badan Geologi, Kementerian Energi dan Sumber Daya Mineral.

Suryawan, A. (2019). Manajemen Alat Berat. Yogyakarta: Penerbit Deepublish. E-ISBN: 978-623-02-0245-2.

Wang, S., Yu, S., Hou, L., Wu, B., dan Wu, Y. (2022). Prediction of Bucket Fill Factor of Loader Based on Three-Dimensional Information of Material Surface. Electronics (Switzerland), Vol.11,No.18. Hal.1–14.

Winukir, G., dan Winarno, E. (2022). Kajian Geometri Jalan Angkut Terhadap Konsumsi Bahan Bakar Alat Angkut Dump Truck Pada Penambangan Batu Andesit Di Kabupaten Kulon Progo , Yogyakarta. Jurnal Pertambangan Dan Lingkungan, Vol.3, No.1. Hal.25–32. ISSN:2775-1384.

Published

2025-06-18