NICKEL ORE MINING SEQUENCE DESIGN IN BLOCK 2 FRONT “X” PT. TIRAN INDONESIA LAMERURU SITE LANGGIKIMA DISTRICT NORTH KONAWE REGENCY

Authors

  • Anwar Masjidin
  • Ika Sartika Ambarsari Halu Oleo University
  • Deniyatno Deniyatno Halu Oleo University
  • Mohammad Suriyaidulman Rianse Halu Oleo University

Keywords:

Nickel ore, Pit Limit, Safety Factor, Sequence

Abstract

Mining sequences are forms of mining that show how a pit will be mined from the initial stage to the final stage of the mine design. PT Tiran Indonesia is one of the national private companies engaged in the nickel mining industry with a mining business license area (WIUP) of 1,411 Ha. Currently the company plans to open a new mining location, namely in Block 2 front X to maintain production when several other blocks or fronts are no longer operating or (mineout). The production target for Block 2 front X is 100,000 tons/month with a cut off grade of >0.8% Ni. This requires a good technical design to achieve the desired production target. The mining design is made based on the parameters of the slope geometry results and the distribution of ore that has been estimated. Based on the slope geometry results, the mining level geometry is obtained in the form of a 6 meter high level, 2 meter wide level, 60° slope angle and 9 meter ramp width. The results of the level geometry analysis meet the safety factor standard in accordance with the FK value of the mine slope based on the Minister of Energy and Mineral Resources Decree No. 1827 K/30 / MEM-RI / 2018 for single slope and overall slope conditions. The mined reserves based on the design of the mining pit limit design in Block 2 front X which meets the company's cut off grade standard, and includes a mining recovery parameter of 90% is 420.570,00 m3 and tonnage of 656.089,20 tons with an average grade of 1,63% Ni, then it is estimated that the mine life in Block 2 front X will last for approximately 6.56 months. The mining sequence design is divided into 7 stages carried out with a level plan system or following the excavation level with the highest elevation of 288 meters above sea level and the lowest elevation of 208 meters above sea level.

References

Anonim, 2018, Keputusan Menteri Energi dan Sumber Daya Mineral Republik Indonesia Nomor 1827 K/30/MEM, Menteri Energi dan Sumber Daya Mineral Republik Indonesia.

Bargawa, W., S. 2018. Perencanaan Tambang Edisi Kedelapan. Yogyakarta: Kilau Book.

Faisal, F., 2013. Metode Ordinary Kriging Blok pada Penaksiran Ketebalan Cadangan Batubara (Studi Kasus : Data Ketebalan Batubara pada Lapangan Eksplorasi X). Kumpulan Makalah Seminar Semirata, Vol. 1, No. 1, ISSN: 203–209.

Hardiyatmo, H.S. (2018). Mekanika Tanah II. Gadjah Mada University Press.ISBN: 979-420-637-7.

Hustrulid, W., Kuchta, M., & Martin, R., 2013. Open Pit Mine Planning dan Design 3rd Edition. CRC Press/Balkema, London. ISBN-13: 978-1-46657512-7.

Kennedy, B.A. 2009. Surface Mining 2nd Edition. Colorado. Amerika Serikat. ISSBN-13: 978-1-4822-2117-6.

Kurniadi, A., Rosana, M. F., dan Yuningsih, E. T., 2018., Karakteristik Batuan Asal Pembentukan Endapan Nikel Laterit di Daerah Madang dan Serakaman Tengah, Padjadjaran Geoscience Journal, Vol. 2, No. 3, Hal. 221-234. ISSN: 2597-4033

Kurnianto, A., Setihadiwibowo, A.P., dan Giamboro, W.S. 2019. Estimasi Sumberdaya Batubara Menggunakan Metode Nearest Neighbour Point, Inverse Distance Weighting, dan Krigging Pada Daerah Muara Bungo, Sumatera Selatan. Jurnal Geocelebes Vol. 3. No. 2. ISSN: 2579-5821.

Pasaribu, J. M., dan Haryani, N. S., 2012. Perbandingan Teknik Interpolasi DEM SRTM dengan Metode Inverse Distance Weighted (IDW), Natural Neighbor dan Spline, Jurnal Penginderaan Jauh, Vol. 9, No. 2, Hal. 126139. ISSN: 1412-8098.

Prasetyono, E., N., H., Kusdarini, E., dan Galih, Y., D., 2020. Rancangan Pit Penambangan Batubara Pada Pit X PT. Prolindo Cipta Nusantara, Site Sie Loban Kabupaten Tanah Bumbu Provinsi Kalimantan Selatan. Prosiding Teknologi Kebumian dan Kelautan, Vol. 2, No. 1, Hal. 71-78, ISSN: 2686-0651.

Setiawan, A. R., Muchsin, A. M., dan Guntoro, D., 2018. Rancangan Teknis Penambangan Bijih Bauksit pada Wilayah Bukit D PT Kalbar Bumi Perkasa Kecamatan Tayan Hilir Kabupaten Sanggau Provinsi Kalimantan Barat, Prosiding Teknik Pertambangan. Vol. 4, No. 2, Hal. 553-560. ISSN: 2460-6499.

Sidiq, H. 2019. Perencanaan Desain Tambang. Yogyakarta : Elje Branding. ISBN: 978-602-336-544-9.

SNI 4726:2019. 2019. Pedoman Pelaporan Hasil Eksplorasi, Sumber Daya, dan Cadangan Mineral. Badan Standar Nasional.

Supandi, Hidayatullah S., dan Bambang P.P. 2023. Buku Ajar Perencanaan Tambang. Yogyakarta: Deepublish (CV. Budi Utama). ISBN: 978-623-02-6386-6.

Wintolo, D. (2019). Pengantar Statistik Dan Geostatistik. Gadjah Mada University Press Anggota IKAPI dan APPTI. ISBN: 978-602-386-310-5

Published

2025-06-18